Home » Our Services »
A Service That Corrects What Your Water Meter Was Over-Reading — Without Changing Anything About How You Use Water
Our FCD (Flow Conditioning Device) installation service corrects water meter over-reading caused by gas and vapor that form inside the meter during demand surges. One installation. Savings on the next full billing cycle. Under 0.8 psi pressure loss. Works in any commercial or industrial facility.
Up to 30%
bill reduction
46%
single result
90%
ROI under 12 months
Under 0.8 psi
pressure loss —
fundamental design
Direct answer: Water Flow Innovations reduces commercial water and sewer costs by correcting meter over-registration at its source — not by asking a facility to use less water. The Flow Conditioning Device (FCD) installs at the meter and reduces the gas and vapor formation and turbulence that cause municipal meters to register more volume than was actually delivered. Because sewer charges are typically calculated from that same metered intake, correcting the water reading reduces both bills simultaneously. Documented results show typically up to a 30% combined reduction (46% highest), with about 90% of customers reaching full ROI in under 12 months — with no change to facility operations, equipment, or water use.
See Your Savings, Hour by Hour
The Problem: Your Water Meter Counts Gas and Vapor as Billed Water — on Every Billing Cycle
Commercial and industrial water meters don’t just measure water. They measure everything that passes through them — including gas and vapor that form during pressure changes and demand surges from on-off cycling and variable demand. Your meter counts all of that as billed water volume. You pay for it on the water bill — and again on the sewer bill, since sewer charges are calculated directly from metered water consumption.
This isn’t a meter malfunction. It’s how displacement and turbine meters work by design — they can’t distinguish between water and the gas and vapor that form inside them during demand surges in real-world commercial plumbing. The FCD installs immediately after your meter and creates the laminar-like conditions that allow the meter to read accurately. The meter reads actual water. Your bill reflects actual consumption. The over-charge disappears — starting on the next full billing cycleing cycle after installation.
What the Service Delivers
Every FCD installation includes the following from initial contact to verified bill reduction — with no ongoing
service fees or maintenance requirements after installation.
💧
Free Savings Estimate
Immediate projected savings range from the Water & Sewer Bill Savings Calculator — no contact info required. Or request a personalized analysis from our team based on your actual bills.
🏔️
Facility Assessment
We review your water bills, meter type, pipe size, and facility configuration to confirm savings potential and specify the correct FCD for your connection.
🏷️
Professional Installation
FCD installed immediately after your water meter in about an hour — any pipe size, any meter type, short 1-hour operational disruption, under 0.8 psi pressure loss.
🥤
Verified Bill Reduction
Savings appear on your next full water and sewer billing cycle — documented on actual utility bills for management reporting, ESG disclosure, and sustainability certification.
🏢
6-Month Money-Back Guarantee
No questions asked. If you are not satisfied within 6 months of installation for any reason, you receive a full refund for the FCD. Zero financial risk.
🧪
Lifetime Transferable Warranty
The warranty stays with the device and the property through ownership changes, management transitions, and facility sales. No annual fees or renewals. Transfer fee applies.
Purchase or Lease
Choose the payment structure that works for your facility’s budget, accounting preferences, and fiscal year timing.
Purchase
One-time investment. Lifetime warranty. Savings stay
with the property forever.
Lease
Predictable monthly cost. No capital expenditure. Savings typically exceed lease payments from the next full billing cycle.
What “Under 0.8 psi pressure loss” Means for Your Facility
Pressure loss under 0.8 psi means nothing downstream of the FCD changes in practice — not in your building, your process, your production line, or for your guests, tenants, patients, or students. The FCD conditions flow through the measurement zone without restricting it. System pressure at every downstream connection in your facility sees no practical change after installation.
This is not a feature claim. It is how the FCD works by design — the device creates laminar flow without reducing flow rate. For any operation where pressure consistency is critical — hospitals, semiconductor fabs, food processing plants, data center cooling, irrigation systems — Under 0.8 psi pressure loss is the single most important characteristic of the service. You get the bill reduction without any operational compromise.
From First Contact to Verified Savings
The FCD service process is fast, with about a 1-hour water shutoff, and produces verifiable savings
starting on the next full billing cycleing cycle after installation.
1
Calculate Your Savings
Use the free Savings Calculator for a 24-hour savings estimate, or contact us directly. No commitment required at this stage.
2
Free Savings Analysis
We review your bills, meter type, and facility configuration — and project your specific savings range before any purchase decision.
3
FCD Installation
Installed at your water meter in about an hour. Any pipe size. Any meter type. No operational disruption. Brief water shutoff only.
4
Verified Bill Reduction
Savings on your next full billing cycle. Documented on actual utility bills. Available for management, ESG, sustainability, and due diligence reporting.
Common Questions — Service Questions
What facilities qualify for this service?
Any commercial or industrial facility with a metered water connection qualifies — regardless of industry, size, pipe configuration, or meter type. We serve hotels, hospitals, manufacturers, apartment buildings, schools, universities, farms, data centers, and 60+ other facility types. If your facility pays a water bill, the FCD service can reduce it.
Is there a minimum facility size or bill amount?
How long does installation take?
Installation typically takes about an hour for straightforward configurations. More complex pipe configurations may require a longer window. The only operational requirement is a brief water shutoff during installation — typically around an hour — which can be scheduled at any time that suits your facility’s operations.
Do you install the FCD or do we?
Can the documented savings be used for LEED, ESG, or sustainability reporting?
What if we don't see the expected savings?
Water Flow Innovations offers a 6-month money-back guarantee — no questions asked. If you are not satisfied within 6 months of installation for any reason, you will receive a full refund for the FCD. Installation cost is non-refundable. The FCD also carries a lifetime transferable warranty.
Also From Water Flow Innovations
If your facility also has a steam system, we offer steam system repair and optimization — flash steam recovery, condensate hammer solutions, and steam trap surveys. Both services can be delivered together or independently.
Certifications & Industry Standards
Up to 30% bill reduction | 46% highest documented | 6-month money-back guarantee | Under 0.8 psi pressure loss
Start Reducing Your Water & Sewer Bills — On the Next Full Billing Cycle
Calculate your savings instantly, get a quote, or request a
free facility-specific analysis from our team.